Check the AIT conveyor reed switch

WHAT YOU NEED 

Tools:Flat Head Screwdriver

Safety Equipment:Standard Personal Protective Equipment

CAUTIONWhen using material handling in the manual mode, make sure that everything and everyone is clear of moving parts to prevent damage or injuries.

  1. In the Material Handling window, click  to lower the conveyor.
  2. Make sure the reed switch does not light up when the conveyor is down.
  3. Click  to raise the conveyor.
  4. Make sure the reed switch lights up in red when the conveyor reaches the up position.
  5. If required, use a flat head screwdriver to loosen the mounting screw, reposition the reed switch correctly within the groove and re-tighten the screw.
  6. Make sure the reed switch is physically secure and cannot move from its set position.